|
Davey
Lighting
|
PAGE 1.1
A timeless design from the mid 20th century, originally a mast-mounted fitting for illuminating yacht decks. Its shape ensured rigging lines were not snagged. This clean profile lends itself to being unobtrusive when required or being used as a stylish detail, for both interior and exterior accent lighting.
Cast in bronze or aluminium, there are several finishes. Rear cable entry and surface mounting. A remote transformer is required.
A variety of lighting effects can be achieved, from pin point to a soft wash, dependant on lamp beam spread. See following page for lamp details (article number 9943).
|
Lampholder |
GU5.3
for 35W max non-dichroic halogen reflector lamp. See following
page for lamp order codes. |
|
Dimensions:
Height Width Projection |
130mm 80mm 85mm |
| ORDER CODE | |
| 0751/AL/AN | Anodised aluminium |
| 0751/AL/PO | Polished aluminium |
| 0751/AL/SD | Sandblasted aluminium |
| 0751/GM/PO | Polished bronze |
| 0751/GM/SD | Sandblasted bronze |
| 0751/GM/SD/WE | Weathered sandblasted bronze |
Surface mounted, for use with 0751 mast light where a remote transformer is not possible. Hollow back contains weatherproof transformer. Sandblasted finish, available in aluminium or bronze.
|
Dimensions:
Length Width Projection |
150mm 120mm 35mm (excluding mast light) |
| ORDER CODE | |
| 0759/AL | Sandblasted
aluminium plaque c/w transformer (excludes mast light) |
| 0759/GM | Sandblasted
bronze plaque c/w transformer (excludes mast light) |